Jackson, A., Koster, A. & Adnan, A. On the Energy Absorption and Acceleration Mitigation of 3D Printed Lattice Structures with Computed Tomography (CT) Scan Damage Analysis. Multiscale Sci. Eng. (2024). https://doi.org/10.1007/s42493-024-00118-6
Jackson, P. Davidson, and A. Adnan, “Low-Velocity Impact Resistance of Multilayer Composite Structures for Mitigating Acceleration,” J Compos Mater, 2024, https://doi.org/10.1177/00219983241292785
Jackson, A., Koster, A., Hasan, F. et al. Impact Testing of a Surrogate Human Head Model for Correlation of Bulk Acceleration to Intracranial Pressure. Multiscale Sci. Eng. 5, 35–52 (2023). https://doi.org/10.1007/s42493-023-00090-7
Ahmad, L.M., Jackson, A. & Adnan, A. Static and Dynamic Mechanical Properties of 3D printed Digital Materials. Multiscale Sci. Eng. 6, 78–94 (2024). https://doi.org/10.1007/s42493-024-00107-9
Koster, A., Adnan, A. Dynamic Similitude of Human Head Surrogates. Multiscale Sci. Eng. (2024). https://doi.org/10.1007/s42493-024-00111-z
Vishnu V. Ganesan, Ashfaq Adnan, Ankur Jain, Effect of Crack Tip Geometry and in situ Compression Rolling on Fracture Failure Mechanisms of Polymer 3D Printed Parts. Progress in Additive Manufacturing (2024)
Darshan Ravoori, Swapnil S. Salvi; Hardikkumar Prajapati, Momen Qasaimeh; Ashfaq Adnan, Ankur Jain, Void Reduction in Fused Filament Fabrication (FFF) Through In Situ Nozzle-Integrated Compression Rolling of Deposited Filaments, Virtual and Physical Prototyping, 1-14, 2021
Hardikkumar Prajapati; Swapnil S. Salvi; Darshan Ravoori, Momen Qasaimeh; Ashfaq Adnan, Ankur Jain, Improved Print Quality in Fused Filament Fabrication through Localized Dispensing of Hot Air around the Deposited Filament, Additive Manufacturing, Volume 40,2021, 101917.
Alireza Rezaee, Ashfaq Adnan, On the Elastic Stress Singularities and Mode I Notch Stress Intensity Factor for 3D printed Polymers, Engineering Fracture Mechanics, 204, 235-245, 2018